Buy Your Own Parts and Save

Sponsors

Welcome
Welcome, use the side menus or search box to find your items.   ...

Home > GrowersHouse.com > Root Catalog > Default Category > Controllers • Meters

Powerbox LSM-12 Flipbox

FLIPBOX® LSM-12 is 6 ballast, 12 light FLIPBOX® that allows you to run 12 lights from 6 ballasts. The FLIPBOX® LSM-12 has a built-in digital timer with battery backup to allow for complete automation of switching between 12 lights from 6 ballasts. Hand-built at their California factory, 5 year warranty. Voltage independent - works with 120 Volt and 240 Volt ballasts. Fits Sunlight Supply® style ballasts. Detachable trigger cord can override the built-in timer, so Powerbox™ can be controlled by your own timer, or other devices. Double production without installing additional power circuits and saves money on ballasts, use 6 ballasts to run 12 lights. Powerbox Flipbox Compatibility Powerbox Flipboxes work with virtually any H.I.D. ballast, be it magnetic or digital/electronic. Some ballasts, however, may require additional steps to function properly. If you are using Lumatek, Nextgen, or Phantom digital ballasts, or if your ballasts are having trouble switching, you must observe the following instructions in BOLD lettering. Some digital/electronic ballasts contain an 'error sensing' circuit that is meant to detect if there is a bulb failure. In the event of a bulb failure, the ballast will shut itself down and not restart until the user unplugs the ballast to reset it. When running with Flipboxes®, ballasts that contain this 'error sensing' circuitry often misinterpret a light switching cycle as a dead bulb, and they shut themselves off. This problem is easy to remedy by following a few simple steps: 1). With your lighting controller, or timer, program so that your ballast(s) turn OFF 5 minutes before you will be initiating the light switching (FLIP) cycle. (For Instance: If your light switching cycle occurs at 12:00PM, then program the ballast(s) to turn off at 11:55AM.) 2). Program the Flipbox® timer to initiate the changeover (FLIP) at 12:00PM. 3). Program your lighting controller, or timer, to turn the ballast(s) back ON at 12:05PM. 4). Repeat this procedu

Click here to buy now - $749.00

(C)Copyright 2024 Wormiculture Gardening | Powered by AMS3 | Sitemap | Admin All Rights Reserved